2) Clay all the painted surfaces if necessary making sure you remove all contaminants.
3) Depending on the condition of your paint you will need to use a machine polisher like the Flex XC3401 to remove any swirls, imperfections, or scratches in the paint. The surface needs to be in the absolute best possible condition.
4) After the paint has been clayed and polished the final step of the cleaning process is to apply Jax Wax Shield Prep.
5) Spray Jax Wax Shield Prep directly on the paint and wipe immediately back off one panel at a time with the provided black edgeless microfibre towel. This will clean any wax residue, or polishing oils that may be left over from machine polishing. It will leave the paint clean and raw, making it much easier for Jax Wax Shield Pro 9h to bond to the paint.
6) Pour Shield Pro 9h Ceramic Coating onto the supplied applicator and immediately put the cap back on the bottle. This will avoid air exposure to the coating that could lead to the coating hardening or curing inside the bottle.
7) Apply Shield Pro 9h Ceramic Coating to a 2ft x 2ft area. Using light pressure wipe the coating on in even horizontal lines followed by even vertical lines creating an overlapping pattern to ensure complete coverage.
8) After 3-5 minutes or when you see a rainbow type effect on the paint the coating is ready to be wiped off with the provided gray Double Plush Edgeless Microfibre Towel. The coating will be harder to wipe off than your typical wax or sealant. You will feel the microfibre "drag" a little. This is normal. Continue to wipe until all residue is removed.
9) After you have completed the entire vehicle, discard the applicator that you applied the coating with and Double Plush Edgeless microfibre that you removed the coating residue with. The reason for this is the coating will harden in the towel and applicator after it dries which could scratch the next vehicle you try to use it on.
10) Let Jax Wax Shield Pro 9h Ceramic Coating cure for 24 hrs. Water cannot be introduced to the paint in this time to ensure that the coating has properly bonded to the paint.
Apply Smooth Even Coats of Dressing to Tyres and Trim Without the Mess with this DuraFoam Tire Dressing Applicator! This rugged professional tyre dressing applicator...View full product details
Jax Total Interior is a must have product for any car enthusiast that loves to keep the interior of their ride looking brand new at...View full product details
Jax Ultimate Wheel Cleaner is a non acid ph balanced wheel cleaner that is safe for all types of wheels.Jax Ultimate Wheel Cleaner will safely and...View full product details
Cannon Soap is the newest most advanced vehicle washing formula from Jax Wax. With high end surfactants, Cannon Soap cuts through the dirt and grime on your paint...View full product details